# @Seve for the nema17 motor, can you

Channel: #designreview
Source: https://discord.com/channels/1233487248129921135/1566809846030926005
Started: 2026-11-02T16:20:04.731000+00:00
Last activity: 2026-11-02T16:22:04.088000+00:00

## Rishabh — 2026-11-02T13:42:57.213000+00:00

<@757706909351411845> for the nema17 motor, can you share the real male pin image of the motor. I am wondering which one of these would fit.
Attachment: image.png — https://community.tscircuit.com/media/1566809844252540988
Attachment: image.png — https://community.tscircuit.com/media/1566809844902662174
Attachment: image.png — https://community.tscircuit.com/media/1566809845540061194

## Seve — 2026-11-02T16:20:08.393000+00:00

those won't fit, the pitch is the same but they don't snap in

## Seve — 2026-11-02T16:21:33.208000+00:00

https://www.omc-stepperonline.com/nema-17-bipolar-42ncm-59-48oz-in-1-7a-42x42x37-5mm-4-wires-w-1m-cable-connector-17hs15-1704s

## Seve — 2026-11-02T16:22:04.088000+00:00

the photos here are good, if it doesn't snap in it's not going to work, the pins do slide out on dupont connectors