# https://tscircuit.com/AnasSarkiz/NEMA14_

Channel: #designreview
Source: https://discord.com/channels/1233487248129921135/1559668719838560267
Started: 2026-10-13T20:50:56.718000+00:00
Last activity: 2026-10-17T17:04:00.631000+00:00

## Anas — 2026-10-13T20:46:40.053000+00:00

https://tscircuit.com/AnasSarkiz/NEMA14_RP2040#3d

## Rishabh — 2026-10-13T20:50:57.860000+00:00

add knockout text for PWR and DATA

## Rishabh — 2026-10-13T20:51:15.239000+00:00

Even the schematic used for usbc is not standard

## Rishabh — 2026-10-13T20:51:52.673000+00:00

I don't think bulk capacitor is needed

## Seve — 2026-10-13T20:52:13.212000+00:00

you should do the assembly- i don't think the bolts will fit

## Seve — 2026-10-13T20:53:23.753000+00:00

<@756504518417711104> you should try to get the encoder with doNotPlace on the back, we may be adding those because they turn the steppers into servos and add a lot of value

## Anas — 2026-10-13T20:53:51.483000+00:00

this is the only way to make the two USB-Cs on the same side, so I think we need to replace the bolts with other ones

## Seve — 2026-10-13T20:54:17.148000+00:00

the crystal traces are really bad!

## Seve — 2026-10-13T20:54:34.195000+00:00

[attachment]
Attachment: CleanShot_2026-10-13_at_13.54.272x.png — https://community.tscircuit.com/media/1559670708223737876

## Seve — 2026-10-13T20:55:35.394000+00:00

you can use upward usb-c if it is going to help spacing a lot

## Anas — 2026-10-13T20:55:56.137000+00:00

yeah it will helps alot

## Seve — 2026-10-13T20:55:56.879000+00:00

why does your board have 0 warnings and errors if the crystal is so bad

## Anas — 2026-10-13T20:56:25.847000+00:00

thats what Im trying to debug rn 🫠

## Seve — 2026-10-13T20:56:38.208000+00:00

this is one of the best schematics i've seen

## Anas — 2026-10-13T20:57:15.363000+00:00

I agree, I just tald Ai to make it professional lol

## Seve — 2026-10-13T20:57:20.465000+00:00

is this via size going to cost extra
Attachment: CleanShot_2026-10-13_at_13.57.072x.png — https://community.tscircuit.com/media/1559671405623378061

## Rishabh — 2026-10-13T20:58:13.652000+00:00

Can you check if these overriding values of clearance are more than the jlc tolerance capability?
Attachment: image.png — https://community.tscircuit.com/media/1559671628911349910

## Anas — 2026-10-14T23:51:02.808000+00:00

Fixed via size, crystal trace, and using the correct bolts size. 
so I will do assemply but just check this <@809856037376491570> <@757706909351411845> 
https://tscircuit.com/AnasSarkiz/NEMA14_RP2040#3d

## Anas — 2026-10-16T15:48:41.462000+00:00

<@398467566588264449>

## Seve — 2026-10-16T17:24:21.212000+00:00

looks pretty good to me

## Seve — 2026-10-16T17:24:38.119000+00:00

schematic is decent

## Seve — 2026-10-16T17:24:55.946000+00:00

why is this happening? Everything looks strange here
Attachment: CleanShot_2026-10-16_at_10.24.432x.png — https://community.tscircuit.com/media/1560705114858332241

## Anas — 2026-10-16T18:26:31.238000+00:00

<@809856037376491570> <@398467566588264449>  could u take a look

## Abse — 2026-10-16T18:31:57.067000+00:00

lg

## Anas — 2026-10-17T17:04:00.631000+00:00

<@809856037376491570>  Im gonna order it