# @Abse this is the current state of my

Channel: #designreview
Source: https://discord.com/channels/1233487248129921135/1559482023289028673
Started: 2026-10-13T08:26:02.606000+00:00
Last activity: 2026-10-13T18:10:08.724000+00:00

## shibo — 2026-10-13T08:24:48.127000+00:00

<@398467566588264449> this is the current state of my gameboy what about yours? https://tscircuit.com/ShiboSoftwareDev/linux-gameboy-advance

## shibo — 2026-10-13T08:26:03.330000+00:00

<@398467566588264449> please review and send me yours to review

## shibo — 2026-10-13T15:20:44.563000+00:00

<@809856037376491570> 
Please review

## Rishabh — 2026-10-13T15:24:05.309000+00:00

Is this supposed to be this big?
Attachment: image.png — https://community.tscircuit.com/media/1559587539881558107

## Rishabh — 2026-10-13T15:25:04.588000+00:00

What are these holes for?
Attachment: image.png — https://community.tscircuit.com/media/1559587788477829191

## Rishabh — 2026-10-13T15:25:48.659000+00:00

It get's difficult to review if you don't use the standard schematic sheet size
Attachment: image.png — https://community.tscircuit.com/media/1559587973358555216

## Rishabh — 2026-10-13T15:29:46.405000+00:00

Also, why 2 usbc ports?

## Rishabh — 2026-10-13T15:32:00.597000+00:00

I don't think the enclosure is thought out well, where are the holes on the pcb for the spacers to put the screen on?
Attachment: image.png — https://community.tscircuit.com/media/1559589533610410145

## shibo — 2026-10-13T15:37:11.176000+00:00

this is our native enclosure component API, it's very buggy, I'll do a manual enclosure

## shibo — 2026-10-13T15:42:59.049000+00:00

we always need 2 right? one for power and one for programming

## Rishabh — 2026-10-13T15:54:04.989000+00:00

That is for motor controller, this is just a gameboy. It will run through the battery

## shibo — 2026-10-13T17:40:03.034000+00:00

when we're programming we would use one usbc for data and power?

## Seve — 2026-10-13T18:10:08.724000+00:00

<@778624824875941908> for low power devices you only need one usb-c for power and data because you don't need higher voltages/power