# it's bulky but it would be interesting Channel: #designreview Source: https://discord.com/channels/1233487248129921135/1555242302287519834 Started: 2026-10-01T15:38:22.439000+00:00 Last activity: 2026-10-02T06:26:16.745000+00:00 ## shibo — 2026-10-01T15:37:39.870000+00:00 it's bulky but it would be interesting to see how it would look https://github.com/ploopyco/nano-2-trackball Attachment: Screenshot_2026-10-01_at_5.26.42_PM.png — https://community.tscircuit.com/media/1555242300618055851 Attachment: image.png — https://community.tscircuit.com/media/1555242301809365002 ## Seve — 2026-10-01T15:38:23.168000+00:00 Is your optical sensor in stock ## shibo — 2026-10-01T15:52:44.522000+00:00 no, is preordering an option? ## Seve — 2026-10-01T15:54:29.446000+00:00 Consignment? Ideally not for first version, eventually we will cuz mustafa needs it too ## shibo — 2026-10-01T15:56:22.003000+00:00 i think they source it for you Attachment: Screenshot_2026-10-01_at_5.56.06_PM.png — https://community.tscircuit.com/media/1555247008275632189 ## Seve — 2026-10-01T15:57:39.602000+00:00 They will ## Seve — 2026-10-01T15:57:49.436000+00:00 That is consignment ## Seve — 2026-10-01T15:58:48.061000+00:00 Im not convinced you can ship this in a week, maybe we can do it but do you really want to take the mechanical risk and sourcing risk for this one? There is probably something more shippable ## shibo — 2026-10-01T16:03:27.488000+00:00 i thought consignment means you buy it for them i'm working on other boards, but i just thought this would be an interesting idea i'm working on the nema8 20x20 board, which is kinda hard but I believe it's doable I'm also trying to make the gamebody advance using a linux chip Attachment: Screenshot_2026-10-01_at_6.03.04_PM.png — https://community.tscircuit.com/media/1555248792846995610 ## Seve — 2026-10-01T17:06:40.487000+00:00 yea that's great ## Seve — 2026-10-01T17:06:59.996000+00:00 ok well we will be consigning optical sensors at some point, you and mustafa need to agree on one to use haha ## shibo — 2026-10-01T17:07:00.785000+00:00 i'm also trying to make the linux motor controller ## Seve — 2026-10-01T17:07:06.018000+00:00 also we should select one that is good ## Seve — 2026-10-01T17:07:10.365000+00:00 awesome ## shibo — 2026-10-01T17:07:16.790000+00:00 he too is looking for a sensor? i'll chat with him ## Seve — 2026-10-01T17:07:32.801000+00:00 he built a wireless mouse but the sensor is out of stock ## shibo — 2026-10-02T04:49:25.681000+00:00 linux gameboy: https://tscircuit.com/ShiboSoftwareDev/linux-gameboy-advance#3d 20x20 nema8: https://tscircuit.com/ShiboSoftwareDev/nema8-20mm-usbc-pd-controller#3d I'm fixing some 3d rotation issues for it, and it's also using blind/buried vias which is not desired correct? Attachment: image.png — https://community.tscircuit.com/media/1555441554464972880 Attachment: image.png — https://community.tscircuit.com/media/1555441555769397359 ## Seve — 2026-10-02T06:13:17.211000+00:00 gameboy: make sure the connectors are in the right places, microsd is too far, power is in an unusual place and will get accidentally pressed, J_SPK i'm not sure what it goes to. What is the display for this? Try to populate all 3d models and check for jlc availability. Try to add an i2c and spi jst. You need a uart jst as well (there is a standard for this- see the standard programmer) ## Seve — 2026-10-02T06:15:10.545000+00:00 NEMA8, make sure <@809856037376491570> takes a look, if you can get both usbs on the top that will be better for space clearance, better to have the driver and mcu etc. on the bottom then get the connectors on the top ## Seve — 2026-10-02T06:15:22.872000+00:00 yes you cannot use blind/buried vias ## Seve — 2026-10-02T06:15:42.413000+00:00 it will drive the cost too high ## Seve — 2026-10-02T06:16:24.076000+00:00 you can create a TSX file that loads a NEMA8 GLB to test the assembly if you're so inclined, don't worry about that too much because we might make it easier by having modelprinter strings for it ## Seve — 2026-10-02T06:20:05.759000+00:00 looking pretty good ## Seve — 2026-10-02T06:20:29.625000+00:00 i'll connect a SPI display to the allwinner maybe we can do some kind of performance testing- how much storage do we have by default 🤔 ## Seve — 2026-10-02T06:26:16.745000+00:00 <@778624824875941908> jlc is on holiday for 2 more days, so you have some time before there's pressure to order