# https://tscircuit.com/rushabhcodes/ESP32

Channel: #designreview
Source: https://discord.com/channels/1233487248129921135/1552324835751886970
Started: 2026-09-23T14:25:11.701000+00:00
Last activity: 2026-09-23T19:48:15.992000+00:00

## ! Rushabh | Linux Shill — 2026-09-23T14:24:41.644000+00:00

https://tscircuit.com/rushabhcodes/ESP32-E-Reader#pcb

## ! Rushabh | Linux Shill — 2026-09-23T14:25:13.114000+00:00

<@778624824875941908> || <@809856037376491570> review please

## Rishabh — 2026-09-23T14:33:14.878000+00:00

The model's are missing
Attachment: file-7473c3d8d79249a3f40ca426b0aa10dc.tiff — https://cdn.discordapp.com/attachments/1552324835751886970/1552326983361503352/file-7473c3d8d79249a3f40ca426b0aa10dc.tiff?ex=6ab534a9&is=6ab3e329&hm=733a4406c80b72789020ec110a446f1a81e3f60a4932a12a39dba1df1e05b1e5&
Attachment: file-26f727175c663a389ad2ee05a0fad129.tiff — https://cdn.discordapp.com/attachments/1552324835751886970/1552326986066690068/file-26f727175c663a389ad2ee05a0fad129.tiff?ex=6ab534aa&is=6ab3e32a&hm=13cca272ca27c2dbe39b93fd5655a94abb83997e0afa5c86dcfe477ebb22cbbc&

## Rishabh — 2026-09-23T14:33:44.044000+00:00

Also, why do you have switches at the bottom layer

## Rishabh — 2026-09-23T14:33:50.605000+00:00

Have single layer assembly

## ! Rushabh | Linux Shill — 2026-09-23T14:53:41.658000+00:00

the bottom layer will have the screen and the switch below and the top has all the circuit, that was the plan

## Rishabh — 2026-09-23T14:58:41.848000+00:00

In that case, the switches are two small. Use bigger switches so that the 3d case can fit over it and you can press the button

## Seve — 2026-09-23T19:48:15.992000+00:00

this is looking pretty good, if you want it to mount in a case things make sure you're placing holes etc.