# Want a review on smart watch.

Channel: #designreview
Source: https://discord.com/channels/1233487248129921135/1543462095394316288
Started: 2026-08-30T03:28:30.589000+00:00
Last activity: 2026-09-02T17:29:31.384000+00:00

## anil — 2026-08-30T03:27:19.681000+00:00

https://tscircuit.com/anil08607/Smartwatch#files

## anil — 2026-08-30T03:28:32.125000+00:00

.

## Seve — 2026-08-30T03:39:42.114000+00:00

backwards connectors, intentional?
Attachment: CleanShot_2026-08-29_at_20.39.202x.png — https://community.tscircuit.com/media/1543465209111253052

## Seve — 2026-08-30T03:39:49.898000+00:00

not routing yet

## Seve — 2026-08-30T03:41:45.339000+00:00

ask ai to break up the schematic into sheets and sections

## Seve — 2026-08-30T03:41:48.985000+00:00

hard to read it as is imo

## anil — 2026-08-30T06:51:13.474000+00:00

yes fixed all now

## mohan-bee — 2026-08-30T07:25:24.459000+00:00

i say try to keep things on top layer , i think those caps could be harder to assemble some connectors could be placed easily with hand.

## anil — 2026-08-31T03:42:29.920000+00:00

Fixed, moved everything to the top layer.

## anil — 2026-08-31T03:45:14.152000+00:00

IDK why the release fails every time without showing any error, usually within 5 minutes.
Attachment: Screenshot_2026-08-31_at_09.14.17.png — https://community.tscircuit.com/media/1543828989708337172

## anil — 2026-09-01T02:54:48.358000+00:00

<@757706909351411845> <@1238122660345548882> please review it now

## mohan-bee — 2026-09-01T06:52:38.900000+00:00

how do you program this   ?

## mohan-bee — 2026-09-01T06:53:46.255000+00:00

yea i see the programming pins from STM were exposed on  J3

## mohan-bee — 2026-09-01T06:54:18.986000+00:00

also did you find the correct display module for this board ? make sure the board don't overflow the display size.

## Seve — 2026-09-01T19:26:09.914000+00:00

<@1507703667237716221> hmm why isn't it building

## Seve — 2026-09-01T19:26:26.582000+00:00

try rerunning maybe

## anil — 2026-09-02T17:08:56.294000+00:00

build is done this time.

## Seve — 2026-09-02T17:25:42.868000+00:00

this is a bit big for a smart watch no?
Attachment: CleanShot_2026-09-02_at_10.25.172x.png — https://community.tscircuit.com/media/1544760245576798208

## Seve — 2026-09-02T17:27:34.977000+00:00

lots of space in some of the schematic, these should not be so big
Attachment: CleanShot_2026-09-02_at_10.27.052x.png — https://community.tscircuit.com/media/1544760715779244122

## Seve — 2026-09-02T17:28:36.194000+00:00

the heart rate sensor means that the board has to be pointed onto the skin of the user

## Seve — 2026-09-02T17:28:47.722000+00:00

i'm not sure how you can do that with the usb port etc. sticking out

## Seve — 2026-09-02T17:29:31.384000+00:00

the heart rate sensor is like $14 so not exactly something you'd want to mess up basic placement on- i think it has to be on the bottom or just remove it from the first version