# Seve - @Abse do you want to chat on voice Channel: #contributor Source: https://discord.com/channels/1233487248129921135/1520151190468427916 Started: 2026-06-26T19:38:07.181000+00:00 Last activity: 2026-07-02T16:15:15.321000+00:00 ## Seve — 2026-06-28T21:48:01.302000+00:00 it's a standard pin header ## Seve — 2026-06-28T21:48:13.697000+00:00 we should populate it with FEMALE pinheaders ## Seve — 2026-06-28T21:48:29.112000+00:00 that might be complex depending on how it's defined 😬 ## Abse — 2026-06-28T21:49:47.699000+00:00 yeah I'm going with a female didn't pick a part number yet ## Seve — 2026-06-28T21:49:52.191000+00:00 cool ## Seve — 2026-06-28T21:53:40.569000+00:00 btw jlcsearch has a dedicated page for JST connectors https://jlcsearch.tscircuit.com/jst_connectors/list ## Seve — 2026-06-28T21:54:08.572000+00:00 let's use 2mm pitch it's wayyyyyy more common ## Seve — 2026-06-28T21:55:01.256000+00:00 maybe this https://jlcpcb.com/partdetail/BM02B-PASS-TFT(LF)(SN)/C265372 ## Seve — 2026-06-28T21:55:11.409000+00:00 https://jlcsearch.tscircuit.com/jst_connectors/list?package=SMD%2CP%3D2mm&num_pins=2&pitch_mm=2 ## Seve — 2026-06-28T21:56:16.701000+00:00 https://jlcpcb.com/partdetail/SM02B-PASS-TBT(LF)(SN)/C265417 ## Abse — 2026-06-29T15:07:57.055000+00:00 <@757706909351411845> http://github.com/tscircuit/cli/pull/3485 ## Abse — 2026-06-29T23:54:59.339000+00:00 https://www.lcdwiki.com/2.8inch_SPI_Module_ILI9341_SKU:MSP2807 ## Seve — 2026-06-30T01:15:42.751000+00:00 yea seems solid ## Abse — 2026-06-30T22:43:57.664000+00:00 <@757706909351411845> I think we are done 😮‍💨 ## Abse — 2026-06-30T22:43:58.863000+00:00 https://tscircuit.com/editor?package_id=bdff6d37-760b-4aff-8ab1-fae5bc833e32&file_path=index.circuit.tsx ## Abse — 2026-06-30T22:44:11.201000+00:00 plz review, mouting holes will be added now ## Seve — 2026-06-30T22:45:45.285000+00:00 Afk 😭 ## Abse — 2026-06-30T22:46:26.107000+00:00 haha no worries let me know what you thing when you see it I will order it in the morning is that ok ? ## Abse — 2026-06-30T22:46:31.847000+00:00 can we still make it ? ## Seve — 2026-06-30T22:46:37.976000+00:00 Yea i think so ## Seve — 2026-06-30T22:46:41.462000+00:00 Yea probably ## Abse — 2026-06-30T22:46:54.864000+00:00 I added long buttons and long 5mm long power switch ## Seve — 2026-06-30T22:47:07.604000+00:00 If u screenshot it i can at least confirm some stuff if u want to order ## Seve — 2026-06-30T22:47:10.126000+00:00 Up to you ## Seve — 2026-06-30T22:47:23.369000+00:00 3d and pcb can help me do a quicj check ## Seve — 2026-06-30T22:47:28.065000+00:00 Doesnt load on my phone ## Abse — 2026-06-30T22:49:59.843000+00:00 [attachment] Attachment: image.png — https://community.tscircuit.com/media/1521649030134763530 Attachment: image.png — https://community.tscircuit.com/media/1521649030470434916 Attachment: image.png — https://community.tscircuit.com/media/1521649030864568320 ## Abse — 2026-06-30T22:50:04.658000+00:00 [attachment] Attachment: image.png — https://community.tscircuit.com/media/1521649050233864252 Attachment: image.png — https://community.tscircuit.com/media/1521649050892501072 ## Seve — 2026-06-30T22:51:31.711000+00:00 Oh ## Seve — 2026-06-30T22:51:42.876000+00:00 No mounting holes for the board? ## Abse — 2026-06-30T22:52:05.633000+00:00 this is pre holes ## Seve — 2026-06-30T22:52:11.782000+00:00 Oh ## Abse — 2026-06-30T22:52:12.249000+00:00 pushing rn ## Seve — 2026-06-30T22:52:14.184000+00:00 Looks good ## Abse — 2026-06-30T22:52:25.779000+00:00 the power circuit is crazy ## Abse — 2026-06-30T22:52:26.688000+00:00 lol ## Seve — 2026-06-30T22:52:33.470000+00:00 Hmm ## Seve — 2026-06-30T22:52:47.617000+00:00 One possible concern is the button height vs screen height ## Seve — 2026-06-30T22:53:02.744000+00:00 We can make it work either way but the buttons should stick out beyond the screen ## Abse — 2026-06-30T22:53:14.402000+00:00 in theory, when usb c plugged should not drain the bat etc ## Seve — 2026-06-30T22:53:27.055000+00:00 In theory haha ## Seve — 2026-06-30T22:53:31.954000+00:00 You have to have isolation ## Seve — 2026-06-30T22:53:38.535000+00:00 Hopefully the ai did that ## Abse — 2026-06-30T22:53:48.202000+00:00 . ## Seve — 2026-06-30T22:53:50.126000+00:00 If the schematic isnt clean impossible to review it as an EE ## Abse — 2026-06-30T22:54:22.609000+00:00 I tried to clean it not sure if I don't know how or it does not work ? ## Seve — 2026-06-30T22:54:31.729000+00:00 Is button height >12mm to be outside screen ## Abse — 2026-06-30T22:54:38.195000+00:00 tried to use sections no schx/y etc ## Abse — 2026-06-30T22:55:02.012000+00:00 the datasheet is dumb showing the short version let me look ## Seve — 2026-06-30T22:55:06.736000+00:00 Put name prop on all traces and use schematic sections, you CAN use schX/schY ## Seve — 2026-06-30T22:55:31.633000+00:00 In fact its better to provide schX and schY to incrementally improve ## Seve — 2026-06-30T22:55:35.523000+00:00 Haha yea a bit tricky ## Abse — 2026-06-30T22:57:23.390000+00:00 button height is 10 mm ## Abse — 2026-06-30T22:57:32.494000+00:00 should I look for 15 ? ## Seve — 2026-06-30T22:59:00.157000+00:00 I guess so ## Seve — 2026-06-30T22:59:28.882000+00:00 Otherwise the case has to have the screen kind of pop out ig ## Seve — 2026-06-30T22:59:42.127000+00:00 I will export to STEP and try a design tonight? ## Abse — 2026-06-30T23:24:04.182000+00:00 https://tscircuit.com/editor?package_id=bdff6d37-760b-4aff-8ab1-fae5bc833e32&file_path=index.circuit.tsx ## Abse — 2026-06-30T23:24:26.102000+00:00 15 mm pushbuttons and mounting holes ## Abse — 2026-06-30T23:58:44.887000+00:00 [attachment] Attachment: image.png — https://community.tscircuit.com/media/1521666332398059520 ## Abse — 2026-06-30T23:59:01.825000+00:00 heading to bed ## Abse — 2026-06-30T23:59:26.449000+00:00 not sure we can clean sch alot Attachment: image.png — https://community.tscircuit.com/media/1521666506721595555 ## Seve — 2026-07-01T00:00:36.222000+00:00 Cc <@1079361271687807026> <@436098556974333952> this has to be fixed!!!! Cant review this- it is a bug!!!! ## Seve — 2026-07-01T00:01:21.570000+00:00 Will review now and do quick model ## Seve — 2026-07-01T00:08:06.518000+00:00 <@398467566588264449> PCB looks good but really wish i could review schematic- we definitely need to get this label issue resolved ASAP! ## Seve — 2026-07-01T00:08:16.147000+00:00 might take a look if nobody else is ## Abse — 2026-07-01T00:09:37.018000+00:00 sry I can't it's 2 AM here and I'm exhausted ## Seve — 2026-07-01T00:16:24.170000+00:00 ur good i meant mustafa or sangit ## Seve — 2026-07-01T00:16:44.379000+00:00 step model btw Attachment: gameboy.step — https://cdn.discordapp.com/attachments/1520151190468427916/1521670859960356885/gameboy.step?ex=6a5628ac&is=6a54d72c&hm=1839c5f2c9966c3405675fc693b7eac4c4a9160446575434ee06dbc245af7ff0& ## Seve — 2026-07-01T01:45:45.418000+00:00 wow this STEP file has a lot of bugs ## Seve — 2026-07-01T02:01:50.492000+00:00 <@398467566588264449> what's the JST connector in the center of the board for? Attachment: image.png — https://community.tscircuit.com/media/1521697309874982952 ## Seve — 2026-07-01T04:25:58.304000+00:00 did a very basic case, it was hard to do without the step but i think it should fit! Attachment: image.png — https://community.tscircuit.com/media/1521733581175787630 ## Abse — 2026-07-01T06:16:51.368000+00:00 Speaker will connect there and be mounted on the Gameboy case right? ## Seve — 2026-07-01T06:17:04.922000+00:00 ohhh ## Seve — 2026-07-01T06:17:14.373000+00:00 yea i have to have a place for the speaker ## Seve — 2026-07-01T06:17:25.991000+00:00 does it have volume control via a potetiometer btw? ## Seve — 2026-07-01T06:17:32.394000+00:00 forgot about it completely ## Abse — 2026-07-01T06:19:02.072000+00:00 I will try to add a potetiometer quickly ## Seve — 2026-07-01T06:19:40.409000+00:00 if you want to be real crazy you could put a right angle potentiometer (a small one) on the side- then volume could be adjusted by the user ## Seve — 2026-07-01T06:20:06.164000+00:00 can't review schematic until that other bug is fixed- up to you if you want to order before we do a proper schematic review ## Abse — 2026-07-01T06:20:12.316000+00:00 That what I was thinking about haha ## Abse — 2026-07-01T06:20:44.450000+00:00 I will put the volume control on the left ## Seve — 2026-07-01T06:20:46.780000+00:00 <@1079361271687807026> might wake up soon and be able to help with the trace name fix, which i think is a pretty big deal (good find on your part- will probably effect ti) ## Abse — 2026-07-01T06:21:18.997000+00:00 Yeah I can wait ## Mustafa7 — 2026-07-01T06:21:33.892000+00:00 name on trace is not working? ## Mustafa7 — 2026-07-01T06:21:49.785000+00:00 It should create a short label according to name ## Seve — 2026-07-01T06:24:49.829000+00:00 it's not working for the subcircuits, check out his circuit ## Seve — 2026-07-01T06:25:04.199000+00:00 https://tscircuit.com/editor?package_id=bdff6d37-760b-4aff-8ab1-fae5bc833e32&file_path=index.circuit.tsx ## Mustafa7 — 2026-07-01T08:24:13.828000+00:00 <@398467566588264449> https://github.com/tscircuit/core/pull/2538 ## Abse — 2026-07-01T08:48:57.774000+00:00 Lgtm but you have test failing ## Mustafa7 — 2026-07-01T10:56:02.367000+00:00 <@398467566588264449> looks much cleaner now, but you have some bad schX/schY coordinates in the subcircuits. You need to fix that. Attachment: Screenshot_2026-07-01_at_4.25.15_PM.png — https://community.tscircuit.com/media/1521831745136099450 ## Abse — 2026-07-01T11:45:24.636000+00:00 Will fix them ty ## Abse — 2026-07-02T09:09:11.499000+00:00 <@400684445054795796> I don't understand, when I generate the srj from core and run it in autoruoter it works but it still fail on tscirucit.com and on the cli when trying to route ? ## 0hmx — 2026-07-02T11:45:32.420000+00:00 version issue ?? the core is not on latest auto router ## 0hmx — 2026-07-02T11:56:41.576000+00:00 https://github.com/tscircuit/core/pull/2557/changes#diff-7ae45ad102eab3b6d7e7896acd08c427a9b25b346470d7bc6507b6481575d519 ## Abse — 2026-07-02T14:37:11.328000+00:00 I'm losing my mind ## Seve — 2026-07-02T16:02:40.073000+00:00 <@398467566588264449> status? ## 0hmx — 2026-07-02T16:15:00.515000+00:00 is their any other problem <@398467566588264449> with this; you said something is wrong do you also mean this issue or something else Attachment: image.png — https://community.tscircuit.com/media/1522274404359471226 ## Abse — 2026-07-02T16:15:15.321000+00:00 same issue yeah